A WORD ABOUT YOUR KEYS
Your vehicle uses a keyless ignition system.
This system consists of a Key Fob with Remote
Keyless Entry (RKE) transmitter and a Keyless
Ignition Node (KIN).
Keyless Enter-N-Go™ Feature
This vehicle is equipped with the Keyless Enter-
N-Go™ feature, (refer to "Keyless Enter-N-
Go™" in "Things To Know Before Starting Your
Vehicle" for further information).
Keyless Ignition Node (KIN)
This feature allows the driver to operate the
ignition switch with the push of a button, as long
as the Remote Keyless Entry (RKE) transmitter
is in the passenger compartment.
The Keyless Ignition Node (KIN System) has
four operating positions, three of which are
labeled and will illuminate when in position. The
three positions are: OFF, ACC, and ON/RUN.
The fourth position is START. During start, RUN
will illuminate.
NOTE:
In case the ignition switch does not change
with the push of a button, the RKE transmit-
ter (Key Fob) may have a low or dead bat-
tery. In this situation a back up method can
be used to operate the ignition switch. Put
the nose side (side opposite of the emer-
gency key) of the Key Fob against the EN-
GINE START/STOP button and push to oper-
ate the ignition switch.
Keyless Ignition Node (KIN System)
1 — OFF
2 — ACC (ACCESSORY)
3 — ON/RUN
11