Preparations For Jacking - Dodge Challenger SRT 392 2015 Operating Information Manual

Spare Tire Fastener
4. Remove the spare tire.
5. Remove the fastener securing the jack.
Jack Fastener
242
6. Remove the jack and lug wrench assembly
from under the spare tire. Turn the jack
screw to the left to loosen the lug wrench,
and remove the wrench from the jack
assembly.
WARNING!
A loose tire or jack thrown forward in a
collision or hard stop could endanger the
occupants of the vehicle. Always stow the
jack parts and the spare tire in the places
provided. Have the deflated (flat) tire re-
paired or replaced immediately.

Preparations For Jacking

1. Park the vehicle on a firm, level surface as
far from the edge of the roadway as pos-
sible. Avoid icy or slippery areas.
WARNING!
Do not attempt to change a tire on the side of
the vehicle close to moving traffic, pull far
enough off the road to avoid being hit when
operating the jack or changing the wheel.
2. Turn on the Hazard Warning flasher.
3. Set the parking brake.
4. Place the shift lever into PARK (automatic
transmission) or 1st
transmission).
5. Turn OFF the ignition.
6. Block both the front and rear of the wheel
diagonally opposite
of the jacking posi-
tion. For example, if
changing the right
front tire, block the
left rear wheel.
gear (manual