Dodge Challenger SRT 392 2015 Operating Information Manual page 133

• Display Brightness With Headlights OFF
When in this display, you may select the bright-
ness with the headlights off. Adjust the bright-
ness with the "+" and "–" setting buttons on the
touchscreen or by selecting any point on the
scale between the "+" and "–" buttons on the
touchscreen. Then press the back arrow button
on the touchscreen.
NOTE:
To make changes to the Display Brightness
with Headlights OFF setting, the headlights
must be off and the interior dimmer switch
must not be in the party or parade posi-
tions.
• Set Theme — If Equipped
This feature will allow you to choose a theme for
the display screen. The theme will change the
background color, highlight color, and button
color of the display screen.
• Set Language
When in this display, you may select one of
multiple languages (Brasileiro/Deutsch/English/
Español/Français/Italiano/Nederlands/Polski/
130
Português/Türk/Pусский) for all display nomen-
clature, including the trip functions and the
navigation system (if equipped). Press the Set
Language button on the touchscreen, then
press the desired language button on the touch-
screen until a check-mark appears next to the
language, showing that setting has been se-
lected. Press the back arrow button on the
touchscreen to return to the previous menu.
• Touchscreen Beep
When in this display, you may turn on or shut off
the sound heard when a touchscreen button
(button on the touchscreen) is pressed. Press
the "Touchscreen Beep" button on the touch-
screen until a check-mark appears next to the
setting, showing that setting has been selected.
Press the back arrow button on the touchscreen
to return to the previous menu.
• Control Screen Time-Out — If Equipped
When this feature is selected, the Controls
Screen will stay open for five seconds before
the screen times out. With the feature dese-
lected, the screen will stay open until it is
manually closed. Press the Control Screen
Time-Out button on the touchscreen until a
check-mark appears next to the setting, show-
ing that setting has been selected. Press the
back arrow button on the touchscreen to return
to the previous menu.
• Navigation Turn-By-Turn In Cluster — If
Equipped
When this feature is selected, the turn-by-turn
directions will appear in the display as the
vehicle approaches a designated turn within a
programmed route. To make your selection,
press the "Navigation Turn-By-Turn In Cluster"
button on the touchscreen, until a check-mark
appears next to the setting, showing that setting
has been selected. Press the back arrow button
on the touchscreen to return to the previous
menu.
Units
After pressing the "Units" button on the touch-
screen the following settings will be available:
• Units
When in this display, you may select each unit
of measure independently displayed in the
Driver Information Display (DID), and naviga-