To Activate/Deactivate; To Set A Desired Acc Speed - Dodge Challenger SRT 392 2015 Operating Information Manual

Hide thumbs Also See for Challenger SRT 392 2015:
Table of Contents

Advertisement

NOTE:
You cannot engage ACC under the following
conditions:
• When you apply the brakes.
• When the parking brake is set.
• When the automatic transmission is in
PARK, REVERSE or NEUTRAL.
• When the Vehicle speed is outside of the
speed range.
• When the brakes are overheated.
• When the ESC is in Full-off mode.
88

To Activate/Deactivate

Push and release the Adaptive Cruise Control
(ACC) ON/OFF button. The ACC menu in the
DID displays "ACC Ready."
Adaptive Cruise Control Ready
To turn the system OFF, push and release the
Adaptive Cruise Control (ACC) ON/OFF button
again. At this time, the system will turn off and
the DID will display "Adaptive Cruise Control
(ACC) Off."
Adaptive Cruise Control Off
WARNING!
Leaving the Adaptive Cruise Control (ACC)
system on when not in use is dangerous. You
could accidentally set the system or cause it
to go faster than you want. You could lose
control and have a collision. Always leave
the system off when you are not using it.

To Set A Desired ACC Speed

When the vehicle reaches the speed desired,
push the SET + button or the SET - button and
release. The DID will display the set speed.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Challenger srt hellcat 2015

Table of Contents