Wheel And Tire Torque Specifications; Torque Specifications - Dodge Challenger SRT 392 2015 Operating Information Manual

2. Locate the round Sealant Bottle release but-
ton in the recessed area under the sealant
bottle.
3. Press the Sealant Bottle release button. The
Sealant Bottle (1) will pop up. Remove the
bottle and dispose of it accordingly.
4. Clean any remaining sealant from the Tire
Service Kit housing.
5. Position the new Sealant Bottle (1) in the
housing so that the Sealant Hose (6) aligns
with the hose slot in the front of the housing.
Press the bottle into the housing. An audible
click will be heard indicating the bottle is
locked into place.
6. Verify that the cap is installed on the fitting at
the end of the Sealant Hose (6) and return
the hose to its storage area (located on the
bottom of the air pump).
7. Return the Tire Service Kit to its storage
location in the vehicle.
240
WHEEL AND TIRE TORQUE
SPECIFICATIONS
Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to
the vehicle. Any time a wheel has been re-
moved and reinstalled on the vehicle the lug
nuts/bolts should be torqued using a properly
calibrated torque wrench.

Torque Specifications

Lug Nut/ **Lug Nut/
Bolt Torque Bolt Size
111 Ft-Lbs
M14 x 1.50
(150 N·m)
**Use only Chrysler recommended lug nuts/
bolts and clean or remove any dirt or oil before
tightening.
Inspect the wheel mounting surface prior to
mounting the tire and remove any corrosion or
loose particles.
Lug Nut/
Bolt Socket
Tighten the lug nuts/bolts in a star pattern until
Size
each nut/bolt has been tightened twice.
22 mm
Wheel Mounting Surface
Torque Patterns