Valet Mode - Dodge Challenger 2021 Performance Features Manual

V M
ALET ODE
Valet Mode Activation
To enter Valet Mode, press the Valet button on
the touchscreen and a pop-up screen will ask
you if you would like to enter Valet Mode. After
selecting "Yes", you will be asked to enter a
four-digit PIN code. The PIN code is not set, so
you are free to select any four-digit numeric
combination that will be easy to remember.
While in Valet Mode, the following vehicle
configurations are set and locked to prevent
unauthorized modification:
Engine limited to the lowest power output

state.
On automatic transmissions, transmission

up-shifts earlier than normal.
Traction, Steering, and Suspension are set to

their Street settings.
Steering wheel paddle shifters are disabled.

The Drive Modes interface is not available.

Pressing the SRT button on the touchscreen
will display the unlock keypad.
The ESC Off button is disabled.

The Launch Control button is disabled.

MULTIMEDIA
Valet Mode Deactivation PIN
The Valet Mode Deactivation key pad will then
prompt you for your four-digit PIN code. Enter
your PIN code, and press the GO button on the
touchscreen. Your vehicle will return to the
default state whenever exiting Valet Mode.
NOTE:
If your four-digit PIN is lost or forgotten, the
vehicle will exit Valet Mode after a battery
disconnect for approximately five minutes.
Reconnect the battery and place the ignition in
the ON/RUN position; the vehicle will be in Auto
Mode.
57
5