Dodge Challenger SRT 392 2015 Operating Information Manual page 139

the back arrow button on the touchscreen to
return to the previous menu.
• 1st Press Of Key Fob Unlocks
When "Driver Door" is selected with 1st Press
Of Key Fob Unlocks, only the driver's door will
unlock with the first press of the Remote Key-
less Entry (RKE) transmitter UNLOCK button.
You must press the RKE transmitter UNLOCK
button twice to unlock the passenger's doors.
When "All Doors" is selected for 1st Press Of
Key Fob Unlocks, all doors will unlock on the
first press of the RKE transmitter UNLOCK
button.
NOTE:
If the vehicle is programmed 1st Press Of
Key Fob Unlocks "All Doors," all doors will
unlock no matter which Passive Entry
equipped door handle is grasped. If 1st
Press Of Key Fob Unlocks "Driver Door" is
programmed, only the driver's door will un-
lock when the driver's door is grasped. With
Passive Entry, if 1st Press Of Key Fob Un-
locks "Driver Door" is programmed, touch-
ing the handle more than once will only
136
result in the driver's door opening. If "Driver
Door" is selected, once the driver door is
opened, the interior door lock/unlock switch
can be used to unlock all doors (or use RKE
transmitter).
• Passive Entry
This feature allows you to lock and unlock the
vehicles door(s) without having to push the
Remote Keyless Entry (RKE) transmitter LOCK
or UNLOCK buttons. To make your selection,
press the "Passive Entry" button on the touch-
screen, until a check-mark appears next to the
setting, showing that the setting has been se-
lected. Press the back arrow button on the
touchscreen to return to the previous menu.
Refer to "Keyless Enter-N-Go™" in "Things To
Know Before Starting Your Vehicle".
Auto-On Comfort
After pressing the "Auto-On Comfort" button on
the touchscreen the following settings will be
available.
• Auto-On Driver Heated/Ventilated Seat &
Steering Wheel With Vehicle Start — If
Equipped
When this feature is selected the driver's
heated seat and heated steering wheel will
automatically turn ON when temperatures are
below 40° F (4.4° C). When temperatures are
above 80° F (26.7° C) the driver vented seat will
turn ON. To make your selection, press the
"Auto Heated Seats" button on the touchscreen,
until a check-mark appears next to setting,
showing that setting has been selected. Press
the back arrow button on the touchscreen to
return to the previous menu.
Engine Off Options
After pressing the "Engine Off Options" button
on the touchscreen the following settings will be
available:
• Easy Exit Seats — If Equipped
When this feature is selected, the Driver's seat
will automatically move rearward once the en-
gine is shut off. To make your selection, press
the "Easy Exit Seats" button on the touch-
screen, until a check-mark appears next to