Dodge Challenger SRT 392 2015 Operating Information Manual page 148

When G-Force is selected, the following fea-
tures will be available:
• Lateral G-Force Left and Right
The lateral g-force measures the (sideways) left
and right force of the vehicle.
• Longitudinal G-Force Fore and Aft
The longitudinal g-force measures the accelera-
tion and braking force of the vehicle.
• Peak G-Forces Fore Aft, Left and Right
This shows the maximum g-forces that have
been achieved since the last reset from the DID.
Peak values are maintained through ignition
cycles by the DID until they are cleared by the
driver.
• Vehicle Speed
Vehicle Speed measures the current speed of
the vehicle in either mph or km/h, starting at 0
with no maximum value.
• Steering Wheel Angle
Steering Wheel Angle utilizes the steering angle
sensor to measure the degree of the steering
wheel relative to zero. The zero degree mea-
surement indicates a steering wheel straight
ahead position. When the steering angle value
is negative, this indicates a turn to the left, and
when the steering angle value is positive, a turn
to the right.
When a force greater than zero is measured,
the display will update the value as it climbs. As
the G-Force falls, the peak forces will continue
to display.
Engine
SRT Performance Pages — Engine (6.4L
Automatic Transmission)
SRT Performance Pages — Engine (6.2L
Automatic Transmission)
When selected, this screen displays the follow-
ing values:
• Vehicle Speed
Shows the actual vehicle speed.
• Instantaneous Horsepower/Kilowatts
Shows the instantaneous horsepower.
• Instantaneous Torque
Shows the instantaneous torque.
145