Valet Mode - Dodge Charger SRT 2018 Owner's Manual

434 MULTIMEDIA
The Shift Light RPM Set-Up allows you to set the shift light
to actuate for gears 1, 2, 3, 4, and 5-8. By pressing and
releasing the up/down arrow buttons on the touchscreen
above and below each listed gear, the RPM values will
change in increments of 250 RPM. Pressing and holding the
arrows will change the RPM values in increments of 500
RPM, ranging from 2000–6000 RPM (6.2L) and 2000–6250
RPM (6.4L). The Shift Light setup screen may only be
accessed if the feature is enabled. Press the "Reset to
factory default" button on the touchscreen to change back
to factory settings, or press the "Shift Light Off" button on
the touchscreen to turn the system off completely.

VALET MODE

Valet Mode Activation
To enter Valet Mode, press the "Valet" button on the
touchscreen and a popup screen will ask you if you would
like to enter Valet Mode. After selecting "Yes", you will be
asked to enter a four digit PIN code. The PIN code is not
set, so you are free to select any four digit numeric
combination that will be easy to remember.