Dodge Challenger SRT 392 2015 Operating Information Manual page 128

1/4 Mile
When selected, this screen displays the time it
takes the vehicle to travel 1/4 mile within 25
seconds and the vehicle's speed when it
reaches 1/4 mile.
• The feature will "ready" when the vehicle is at
0 mph (0 km/h). The word "READY" will flash
when conditions are met for the event to
begin.
• Dashes will display if the vehicle fails to
reach 1/4 mile in less then 25 seconds.
• The time and speed will continue to display
until the OK button is pushed.
• Pushing the OK button will clear the current
run and display the vehicle's best 1/4 mile
run.
• To clear the vehicle's best 1/4 mile run, push
and hold the OK button for five seconds.
Braking Distance
When selected, this screen displays the vehi-
cle's braking distance and the speed at which
the brake pedal was depressed.
• This feature will only function when applying
the brakes at speeds above 30 mph
(48 km/h).
• Engaging the parking brake will disable this
feature.
• The word "READY" will display when condi-
tions are met for the event to begin.
• The distance and speed measurements dis-
play while the event is taking place.
• The distance measurement will be aborted if
the brake pedal is released before the ve-
hicle comes to a complete stop.
• The distance and speed measurements will
continue to display until the OK button is
pushed.
• Pushing the OK button will clear the current
run and prepare the cluster to record a new
run.
Current G-Force
When selected, this screen displays the current
G-Force (lateral and longitudinal) that displays
the directions of the forces.
Peak G-Force
When selected, this screen displays all four
G-Force values (two lateral and two longitudi-
nal).
• When a force greater than zero is measured,
the display will update the value as it climbs.
As the G-Force falls, the peak forces will
continue to display.
• Pushing the OK button will clear the peak
force values.
Lap Timer
When selected the Lap Timer page will show
the timer always at 0:00.00 with the previous
Best and Last time data (unless the driver has
cleared it via hold to Reset).
• Pushing OK will start "current" timer from
0:00.0
• When OK is pushed the times are updated
accordingly.
125