Dodge Challenger SRT 392 2015 Operating Information Manual page 52

WARNING! (Continued)
• Child restraint anchorages are designed to
withstand only those loads imposed by
correctly-fitted child restraints. Under no
circumstances are they to be used for
adult seat belts, harnesses, or for attach-
ing other items or equipment to the
vehicle.
Installing Child Restraints Using The
Vehicle Seat Belt
The seat belts in the passenger seating posi-
tions are equipped with a Switchable Automatic
Locking Retractor (ALR) that is designed to
keep the lap portion of the seat belt tight around
the child restraint so that it is not necessary to
use a locking clip. The ALR retractor can be
"switched" into a locked mode by pulling all of
the webbing out of the retractor and then letting
the webbing retract back into the retractor. If it is
locked, the ALR will make a clicking noise while
the webbing is pulled back into the retractor. For
additional information on ALR, refer to the "Au-
tomatic Locking Mode" description under "Oc-
cupant Restraints."
Lap/Shoulder Belt Systems for Installing
Child Restraints in this Vehicle
49