Shift Light; Valet Mode - Dodge Charger SRT 392 2017 Operating Information Manual

Shift Light

Shift Light
To actuate the Shift Light feature, press the
"Shift Light" button on the touchscreen, and then
press the "Shift Light On" button on the touch-
screen. Activation is shown on the instrument
cluster display. Pressing the "Shift Light RPM
Set-Up" button on the touchscreen will take you
to the Shift Light RPM Set-Up screen.
NOTE:
The only time the shift light comes on, is when
the shifter is placed into the manual gate. It will
not work with paddle shifters.
166
Shift Light RPM Set-Up
The Shift Light RPM Set-Up allows you to set
the shift light to actuate for gears 1, 2, 3, 4, and
5-8. By pressing and releasing the up/down
arrow buttons on the touchscreen above and
below each listed gear, the RPM values will
change in increments of 250 RPM. Pressing and
holding the arrows will change the RPM values
in increments of 500 RPM, ranging from 2000–
6000 RPM (6.2L) and 2000–6250 RPM (6.4L).
The Shift Light setup screen may only be ac-
cessed if the feature is enabled. Press the
"Reset to factory default" button on the touch-
screen to change back to factory settings, or
press the "Shift Light Off" button on the touch-
screen to turn the system off completely.

VALET MODE

Valet Mode Activation
To enter Valet Mode, press the "Valet" button on
the touchscreen and a popup screen will ask
you if you would like to enter Valet Mode. After
selecting "Yes", you will be asked to enter a
4 digit PIN code. The PIN code is not set, so you
are free to select any 4 digit numeric combina-
tion that will be easy to remember.