Dodge Challenger SRT 392 2015 Operating Information Manual page 135

• Set Time Minutes
This feature will allow you to adjust the minutes.
The "Sync time with GPS" button on the touch-
screen must be unchecked. To make your se-
lection, press the "+" or "–" buttons on the
touchscreen to adjust the minutes up or down.
Press the back arrow button on the touchscreen
to return to the previous menu.
• Time Format
This feature will allow you to select the time
format display setting. Press the "Time Format"
button on the touchscreen until a check-mark
appears next to the 12hrs or 24hrs setting,
showing that setting has been selected. Press
the back arrow button on the touchscreen to
return to the previous menu.
• Show Time In Status Bar — If Equipped
This feature will allow you to turn on or shut off
the digital clock in the status bar. To change the
Show Time Status setting press the "Show Time
in Status Bar" button on the touchscreen until a
check-mark appears next to setting, indicating
that the setting has been selected. Press the
back arrow button on the touchscreen to return
132
to the previous menu or press the "X" button on
the touchscreen to close out of the settings
screen.
Safety & Driving Assistance
After pressing the "Safety & Driving Assistance"
button on the touchscreen the following settings
will be available:
• Forward Collision Warning — If
Equipped
The Front Collision Warning (FCW) feature pro-
vides an audible and/or visual warning to poten-
tial forward collisions. The feature can be can
be set to Far, or set to Near. The default status
of FCW is the Far setting. This means the
system will warn you of a possible collision with
the vehicle in front of you when you are farther
away. This gives you the most reaction time. To
change the setting for more dynamic driving,
select the Near setting. This warns you of a
possible collision when you are much closer to
the vehicle in front of you. To change the FCW
status, press and release the "Near" or "Far"
button. Then press the back arrow button on the
touchscreen.
For further information, refer to "Adaptive
Cruise Control (ACC)" in "Understanding The
Features Of Your Vehicle".
• ParkSense®
The ParkSense® system will scan for objects
behind the vehicle when the transmission shift
lever is in REVERSE and the vehicle speed is
less than 11 mph (18 km/h). It will provide an
alert (audible and/or visual) to indicate the prox-
imity to other objects. The system can be en-
abled with Sound Only, or Sound and Display.
To change the ParkSense® status, press and
release the "Sound Only" or "Sound and Dis-
play" button. Then press the back arrow button
on the touchscreen. Refer to "ParkSense®" in
"Understanding The Features Of Your Vehicle"
for system function and operating information.
• Rear ParkSense® Chime Volume
The Rear ParkSense® Chime Volume settings
can be selected from the DID or Uconnect®
System — if equipped. The chime volume set-
tings include LOW, MEDIUM, and HIGH. The
factory default volume setting is MEDIUM. To
make your selection, press the "ParkSense®