Print Cards; Print From Id Software; Print From Other Software - DataCard SD260L User Manual

Print Cards

Make sure that cards are loaded in the printer or available to insert when prompted. For the
steps to follow, refer to "Load Cards" on page

Print from ID Software

1.
From the ID software, select the template or create a design for the card.
2.
Select the printer if you use more than one printer.
3.
Enter the data for the card. Follow the instructions for your software.
4.
Capture the photo for the card, if necessary.
5.
Click Print to send the card to the printer.
6.
At the printer, insert a card into the printer, if necessary.

Print from Other Software

1.
Open the software application and select the card printer
as the current printer.
2.
Use the application's setup page to select the ISO ID‐1
page size, or set the page size to 2.13 x 3.38 in.
3.
Set the margins to 0 (zero).
4.
Select an orientation—portrait or landscape.
5.
Create the card design:
a.
Add graphics, such as a company logo or background.
b.
Add a photo.
c.
Add text information, such as name, address, or
employee number.
For information about additional card features, refer to
"Elements of Card Design" in your printer's Installation
and Administrator's Guide.
6.
Click Print to send the card to the printer.
7.
At the printer, insert a card into the printer, if necessary.
26
23.
Printing Cards