Page 1
SD Series Printer Repackaging for Shipment The following procedures are required for preparing the SD series printer unit for shipment. Press the power button to power off the printer. Power Button The front panel on the printer powers off. Disconnect the network or USB cable (the cable is not required for shipment).
Page 2
(unlocked). Disconnect the data cable from the laminator to the printer. Lift the printer off of the laminator and place the printer in a stable position. Close the laminator. Lock Unlock SD Series Printer Repackaging for Shipment...
Page 3
Place the foam caps on the front and back of the printer and set it in the shipping carton. SD260L, SD360 and SD460 units have two additional foam pieces that are placed above and below the printer for shipping. Secure the shipping carton with shipping tape. SD Series Printer Repackaging for Shipment...