Load Cards; Power On The Printer - DataCard CR500 Quick Install Manual

CR500 Instant Issuance System Quick Install Guide

6. Load Cards

a. With the security enclosure door
open, load blank cards in one or
all of the three hoppers. If you are
using only one hopper, load cards
in hopper 3.
Caution: Handle cards by
the edges, or wear the gloves
provided with the printer.
b. Place the card weight on top of the
cards.
Card back
Card front
6
c. Close and lock the printer security
enclosure.

7. Power On the Printer

a. Connect the network data cable
(ordered separately).
B
A
CR500 Instant Issuance System
A
C
B
B