The menu system has four major branches:
Use the Maintenance menu to run a cleaning card or print a test card.
Use the Status menu to see settings and data about the printer.
Use the Configuration menu to change settings.
Use the Activate menu to enable or disable the printer for transport.
Use the Activate menu only during installation or removal of systems that
require activation.
H
& T
INTS
IPS
You can access the menu system when Ready displays on line 1 of the LCD panel.
The printer returns to the Ready status after 2 minutes of no activity. Changes not applied are
lost.
To leave a selection without changing the value, press the up or down arrow key until Exit
displays, and then press E
SD260L/SD360/SD460 Card Printers User's Guide
.
NTER
15