Prepare To Print Cards; Initialize The Ink Ribbon; Set The Retransfer Film Type - DataCard RP90 User Manual

Prepare to print cards

Initialize the ink ribbon

Tips – Ink ribbon
To avoid dirt and dust
•
particles that might adhere
to the ink ribbon during
loading, move (initialize)
the ink ribbon one or two
panels each time the ink
cartridge is removed from
the printer.

Set the retransfer film type

Tips – Retransfer film

Set the retransfer film type

•
when you set up the
printer.
• If you change the type of
film, set the type of
retransfer film you are
using.
16
Press the RESET key on the
1
control panel.
2 The LCD display reads
"Initialize OK?"
Use the up and down arrow
3
keys to select "2'nd Panel,
OK?" or "Next Panel, OK?"
— Press the ENTER key
when "Initialize OK?" is
displayed to initialize the
printer without winding the
ribbon.
— Press the ENTER key
when "2'nd panel, OK" is
displayed and the printer
winds the ribbon two
panel sets.
— Press the ENTER key
when "Next Panel, OK?"
is displayed and the
printer winds the ribbon
one panel set.
1 Press the MENU key until
"Retransfer" is displayed.
Press the ENTER key.
2
"Media Type" is displayed.
3
Use the up and down arrow
4
keys to select Std (1000/roll).
Selections of 250 and 750
are not available at this time.
Press the ENTER key.
5
Press EXIT twice to return to
6
the "Ready" display.

Prepare to print cards

RP90 Plus E and RL90 User Guide