217: Debow Problem; 218: Impresser Problem; 219: Impresser Sensor Problem; 220: Impresser Heater Problem - DataCard SD260L User Manual

217: Debow problem

The laminator has encountered an error in the debow area.
1.
Remove the card.
2.
Press the printer P
3.
Press the printer P
4.
If the problem occurs again, request service.

218: Impresser problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer P
2.
Request service. The system must remain powered off.

219: Impresser sensor problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer P
2.
Request service. The system must remain powered off.

220: Impresser heater problem

The laminator has encountered a critical error. The card will be canceled.
1.
Press the printer P
2.
Request service. The system must remain powered off.

221: Bar code scanner problem

The bar code scanner cannot read the bar code on the overlay. This can indicate a scanner
problem, an unreadable bar code, or an incorrect L1 cartridge.
Try the card again.
If the problem occurs again, request service.
72
button to power off the system.
OWER
button again to power on the system.
OWER
button to power off the system.
OWER
button to power off the system.
OWER
button to power off the system.
OWER
Troubleshooting