DataCard SD260L User Manual page 41

5.
Replace the print ribbon cartridge. Avoid bumping the
printhead when you install the print ribbon cartridge.
6.
Close the printer cover. Press down on the ridges on the front
of the cover to make sure that it latches properly on both
sides.
7.
Power on the printer.
8.
Print a sample card to verify the quality of printing. Refer to
"Print a Test Card" on page
H & T
INTS IPS
Avoid touching the printhead edge with your fingers. Contamination due to skin oils

eventually can damage the printhead.
Avoid touching the printing edge of the printhead cartridge with any sharp objects that can

permanently damage the printhead.
Use only the cleaning swab to clean the printhead. Other materials can stick to the printhead

and cause damage.
Use a cleaning swab one time only. Discard it after you clean the printhead.

SD260L/SD360/SD460 Card Printers User's Guide
22 for more information.
29