DataCard SD260L User Manual page 44

c.
Replace the ribbon cartridge and close the printer cover. Press down on the ridges on the
front of the cover to latch it properly.
Press the U
printer is available to print cards again.
d.
Discard the used cleaning card and cleaning sleeve.
H & T
INTS IPS
Use the cleaning card one time only.

Change the cleaning sleeve each time you clean the printer or change the print ribbon.

If the card light blinks amber and there are cards in the input hopper, it indicates that
the printer's configured cleaning count, set in Printer Manager, has been reached.
Refer to the printer's Installation and Administrator's Guide for information about
setting the Printer Manager FrontPanel values for cleaning.
32
button to return the printer to Ready. The
SER
System Maintenance