Print A Test Card - DataCard SD260L User Manual

A stateless (SLAAC) configuration (if enabled) can have multiple values depending
on the router setup. The LCD displays up to four SLAAC addresses. An additional
digit in line 1 indicates which address is being displayed.
4.
Record the address.
5.
Press the down arrow key until Exit displays on line 2.
6.
Press E
NTER
glows green.

Print a Test Card

The printer includes a test card that runs without using a driver or other source of card data. Use
it to verify that the printer is working.
1.
Begin with the printer Ready. The U
green.
2.
Press the U
LCD panel.
3.
Press E
NTER
4.
Press E
NTER
5.
Press the down arrow until Test Card displays on line 2.
6.
With Test Card displayed on line 2, press E
on line 2.
7.
Press E
NTER
After the card prints, the printer returns to Ready.
22
. Then, press the U button to return the printer to Ready. The U
SER
button to display Suspended on line 1 of the
SER
to enter the menu system.
to enter the Maintenance menu.
to print the test card.
button shows steady
SER
to display Start
NTER
button
SER
Using the System