Removing The Steering Arm; Installing The Steering Arm - Yamaha F150A Service Manual

Muffler assembly bolt C:
20 N·m (2.0 kgf·m, 14.8 ft·lb)
Muffler assembly bolt D:
42 N·m (4.2 kgf·m, 31.0 ft·lb)
11. Install the upper mounts E and bolts into
the upper case.
12. Install the bracket F and bolts, and then
tighten the bolts to the specified torque.
Upper mount bracket bolt:
54 N·m (5.4 kgf·m, 39.8 ft·lb)

Removing the steering arm

1. Remove the circlip 1.
2. Remove the steering yoke 2 by striking
it with a plastic hammer.
63P3F11
Upper case, steering arm, swivel bracket and clamp brackets
3. Remove the steering arm from the swivel

Installing the steering arm

1. Install the washer 1 and bushing 2 onto
2. Place the swivel bracket 4 in an upright
3. Install the bushing 5, new O-ring 6,
bracket by pulling the arm off the bracket.
the steering arm 3.
position, and then install the steering arm
onto the swivel bracket.
bushing 7, and washer 8 onto the
swivel bracket.
1
2
3
4
5
6
7
8
9
7-14