Installing The Lower Unit - Yamaha F150A Service Manual

Installing the lower unit

1. Set the gear shift to the neutral position
at the lower unit.
2. Align the center of the set pin a with the
mark b on the bottom cowling.
b
a
Shift rod push arm: 90890-06052
3. Install the two dowels 1 into the lower
unit.
4. Install the lower unit into the upper case,
and then tighten the lower case mounting
bolts 2 to the specified torque.
5. Install the trim tab 3 to its original posi-
tion, and then tighten the bolt 4 to the
specified torque.
63P3F11
Drive shaft and lower case (counter rotation model)
S63P3270
È X-transom model
Lower case mounting bolt 2:
47 N·m (4.7 kgf·m, 34.7 ft·lb)
Trim tab bolt 4:
42 N·m (4.2 kgf·m, 31.0 ft·lb)
1
2
3
4
5
6
7
8
9
6-52