NOTE:
Install the claws as shown.
Bearing outer race puller
assembly 1:
90890-06523
2. Remove the needle bearing.
Ball bearing attachment 2:
90890-06636
Driver rod LL 3: 90890-06605
Checking the pinion and forward
gear
1. Check the teeth of the pinion, and the
teeth and dogs of the forward gear for
cracks or wear. Replace if necessary.
Checking the bearings
1. Check the bearings for pitting or rum-
bling. Replace if necessary.
63P3F11
Drive shaft and lower case (regular rotation model)
Checking the drive shaft
1. Check the drive shaft for bends or wear.
Replace if necessary.
Checking the lower case
1. Check the skeg and torpedo for cracks or
damage. Replace the lower case if nec-
essary.
S69J6200
1
2
3
4
5
S69J6210
6
7
8
9
6-18