GEN
INFO
64E type power trim and tilt unit
The 64E type clamp bracket and power trim and tilt unit used for current V4 and V6 outboard motors
have been adopted.
This allows easier interchanging of Yamaha outboards with the same classification because the
mounting dimensions are the same.
For the power trim and tilt unit, only the impact absorber valve opening pressure of the tilt piston
fluid circuit has been changed. The pressure is distinguished from those of other models by an iden-
tification mark stamped on the power trim and tilt unit.
È
Identification mark
YA
YB
YC
YD
YE
YF
1-11
General information
Carbureted V4 and V6 (2.6)
N/A
Electronic fuel injected V6 (2.6), HPDI (2.6),
VX200 (200H), VX225 (225G), and VX250 (250C)
F115 (F115A), LF115 (FL115A), and (F100B)
VZ225 (Z225H) and VZ250 (Z250F)
F150 (F150A) and LF150 (FL150A)
Applicable models
È
S63P1150
63P3F11