Assembling The Tilt Piston And Trim Pistons - Yamaha F150A Service Manual

BRKT
Assembling the tilt piston and trim
pistons
1. Install the new dust seal 1 and new O-
rings 2 and 3 onto the tilt cylinder end
screw.
2. Install the tilt cylinder end screw 4 onto
the tilt ram 5.
3. Install new O-rings 6 and 7 onto the tilt
piston 8.
4. Install the ball 9, valve 0, and spring A,
in this order.
5. Install the tilt piston assembly and
washer B onto the tilt ram 5, and then
tighten the tilt piston nut C to the speci-
fied torque.
7-39
Bracket unit
Tilt piston nut:
96 N·m (9.6 kgf·m, 70.8 ft·lb)
6. Install a new backup ring E and a new
O-ring F onto the free piston D.
7. Install a new oil seal G, a new dust seal
H, and a new O-ring I onto each trim
cylinder end screw.
8. Install the backup ring J and a new O-
ring K onto each trim piston.
A A
H
G
H
G
I
J
K
J
K
S63P7360
63P3F11