Removing The Oil Filter; Removing The Timing Belt And Sprockets - Yamaha F150A Service Manual

CAUTION:
To prevent damage to the engine or tools,
screw in the puller set bolts evenly and
completely so that the puller plate is par-
allel to the flywheel magnet.
NOTE:
Apply force to the crankshaft end until the fly-
wheel magnet comes off the tapered portion
of the crankshaft.
Flywheel puller: 90890-06521

Removing the oil filter

1. Place a rag under the oil filter, and then
remove the filter using a 72.5 mm (2.9 in)
oil filter wrench.
63P3F11
NOTE:
Be sure to clean up any oil spills.
Oil filter wrench: 90890-06830
Removing the timing belt and
sprockets
1. Turn the drive sprocket clockwise and
align the " " mark a on the plate with
the "I" mark b on the cylinder block, and
check that "I" marks c and d on the
driven sprockets are aligned.
c
NOTE:
Do not turn the drive sprocket counterclock-
wise.
Power unit
1
2
3
d
4
5
b
a
6
S63P5450
7
8
9
5-20