Assembling The Reverse Gear; Assembling The Drive Shaft Housing - Yamaha F150A Service Manual

2. Install the needle bearing outer case into
the lower case.
NOTE:
Apply gear oil to the needle bearing outer
case before installation.
Ball bearing attachment 3:
90890-06633
Bearing outer race puller
assembly 4:
90890-06523
3. Install the needle bearing into the needle
bearing outer case.
NOTE:
Apply gear oil or grease to the needle bear-
ing before installation.

Assembling the reverse gear

1. Install new needle bearings into the
reverse gear to the specified depth.
Needle bearing attachment 1:
90890-06612
Driver rod SS 2: 90890-06604
Bearing depth plate 3: 90890-06603
63P3F11
Drive shaft and lower case (counter rotation model)
Depth a:
20.95–21.45 mm (0.825–0.844 in)
Depth b:
4.45–4.95 mm (0.175–0.195 in)
2. Install the roller bearing inner race into
the reverse gear using a press.
Bearing inner race attachment 4:
90890-06660

Assembling the drive shaft housing

1. Install the needle bearing into the drive
shaft housing to the specified depth.
Needle bearing attachment 1:
90890-06610
Driver rod SS 2: 90890-06604
Bearing depth plate 3: 90890-06603
Depth a:
5.75–6.25 mm (0.226–0.246 in)
1
2
3
4
5
6
7
8
9
6-48