Removing The Drive Shaft; Disassembling The Drive Shaft Housing; Disassembling The Reverse Gear; Disassembling The Lower Case - Yamaha F150A Service Manual

Removing the drive shaft

1. Remove the drive shaft assembly and
pinion, and then pull out the reverse gear
and thrust bearing.
Drive shaft holder 6 1: 90890-06520
Pinion nut holder 2:
New: 90890-06715
Current: 90890-06505
Disassembling the drive shaft
housing
1. Remove the cover, oil seals, and needle
bearing.
Needle bearing attachment 1:
90890-06610
Driver rod L3 2: 90890-06652

Disassembling the reverse gear

1. Remove the roller bearing inner race
from the reverse gear using a press.
63P3F11
Drive shaft and lower case (counter rotation model)
1
2
S68S6360J
1
Bearing separator 1: 90890-06534
2. Remove the needle bearings from the
reverse gear using a chisel.

Disassembling the lower case

1. Remove the roller bearing and shim(s).
Bearing outer race puller
assembly 1:
90890-06523
Outer race puller claw B 2:
90890-06533
1
2
S67H6270R
3
4
5
S68S6160
6
7
8
9
6-46