Removing The Steering Arm; Installing The Steering Arm - Yamaha F50A Service Manual

BRKT

Removing the steering arm

1. Remove the circlip 1.
2. Remove the steering yoke 2 by striking
it with a plastic hammer.
3. Remove the steering arm from the swivel
bracket by pulling the arm off the bracket.

Installing the steering arm

1. Install the washer 1, bushing 2, O-ring
3, and bushing 4 onto the steering arm
5.
2. Place the swivel bracket 6 in an upright
position, and then install the steering arm
onto the swivel bracket.
3. Install the bushing 7, O-ring 8, and
bushing 9 onto the swivel bracket.
7-49
Bracket unit
4. Install the steering arm 5 into the steer-
ing yoke 0 by aligning the center a of
the yoke with the center b of the steer-
ing arm.
5. Install the circlip A.
62Y3A11