LOWR
Removing the drive shaft
1. Remove the drive shaft, drive shaft hous-
ing, and pinion, and then pull out the for-
ward gear.
Drive shaft holder 6 1: 90890-06520
Pinion nut holder 2:
New: 90890-06715
Current: 90890-06505
Disassembling the drive shaft
housing
1. Remove the cover, oil seals, and needle
bearing.
Needle bearing attachment 1:
90890-06610
Driver rod L3 2: 90890-06652
Disassembling the forward gear
1. Remove the taper roller bearing from the
forward gear using a press.
6-17
Lower unit
1
2
S68S6360J
1
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Bearing separator 1: 90890-06534
2. Remove the needle bearings from the
forward gear using a chisel.
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Disassembling the lower case
1. Remove the taper roller bearing outer
race and shim(s).
S69J6186
S68S6160
63P3F11