BRKT
4. Install the steering yoke 9 to the steer-
ing arm 3 by aligning the center a of
the yoke with the center b of the steer-
ing arm.
5. Install the circlip 0.
6. Inject grease into the grease nipple until
grease comes out from both the upper
and lower bushings c.
7-15
Bracket unit
Installing the upper case
1. Install the upper and lower mounting
bolts into the swivel bracket 1 simulta-
neously.
2. Install the upper mounting nut 2 and
lower mounting nut 3, and then tighten
them to the specified torques.
3. Install the covers 4.
Upper mounting nut 2:
74 N·m (7.4 kgf·m, 54.6 ft·lb)
Lower mounting nut 3:
74 N·m (7.4 kgf·m, 54.6 ft·lb)
63P3F11