Keyboard - HP Elite x2 1011 G1 Maintenance And Service Manual

1. Disconnect the power connector cable (1) from the keyboard base system board.
2. Remove the two Phillips PM2.0×3.6 screws (2) that secure the power connector cable bracket to
the top cover.
3. Remove the power connector cable bracket (3).
The power connector cable bracket is included in the Keyboard Base Bracket Kit, spare part number
793728-001.
4. Remove the Phillips PM1.5×2.7 screw (4) that secures the power connector to the top cover.
5. Remove the power connector cable (5).
Reverse this procedure to install the power connector cable.

Keyboard

For use in country or region:
For use in Belgium
For use in Brazil
For use in Bulgaria
For use in Canada
For use in the Czech Republic
and Slovakia
For use in Denmark
74 Chapter 6 Removal and replacement procedures – Keyboard base
Spare part number:
Keyboard (includes keyboard cable and keyboard backlight cable):
793738-A41
793738-201
793738-261
793738-DB1
793738-FL1
793738-081
For use in country or region:
For use in the Netherlands
For use in North Africa
For use in Portugal
For use in Romania
For use in Russia
For use in Saudi Arabia
Spare part number:
793738-B31
793738-FP1
793738-131
793738-271
793738-251
793738-171