Battery - HP Elite x2 1011 G1 Maintenance And Service Manual

Battery

Description
Battery, 2-cell, 33-WHr, 4.56-AHr, Li-ion (includes cable)
Before removing the battery, follow these steps:
1. Shut down the slate. If you are unsure whether the slate is off or in Hibernation, turn the slate on, and
then shut it down through the operating system.
2. Disconnect all external devices connected to the slate.
3. Disconnect the power from the slate by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the slate.
4. Remove the display panel assembly (see
WARNING!
battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
To prevent loss of information, save your work or shut down the slate through Windows before removing
the battery.
Remove the battery:
1. Disconnect the battery cable (1) from the system board.
2. Remove the six PM1.6×2.5 screws (2) that secure the battery to the bottom cover.
3. Remove the battery (3).
36 Chapter 5 Removal and replacement procedures – slate
To reduce potential safety issues, use only the battery provided with the slate, a replacement
Removing a battery that is the sole power source for the slate can cause loss of information.
Display panel assembly on page
Spare part number
750549-005
32).