HP Elite x2 1011 G1 Maintenance And Service Manual page 42

9. Remove the display panel assembly (5).
CAUTION:
screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel assembly.
10. If it is necessary to replace the display panel cable:
a. Turn the display panel assembly upside down with the docking connector toward you.
b. Release the adhesive strip (1) that secures the display panel cable connector to
the display panel assembly.
c. Disconnect the display panel cable (2) from the display panel.
34 Chapter 5 Removal and replacement procedures – slate
Before turning the display panel upside down, make sure the work surface is clear of tools,