HP Elite x2 1011 G1 Maintenance And Service Manual page 23

Item Component
(5) SIM/SD card release access
(6) USB 3.0 charging (powered) port
(7) Dual-Mode DisplayPort
(8) AC adapter/battery light
(9) Power connector
*The antennas are not visible on the outside of the slate. For optimal transmission, keep the areas immediately around the antennas
free from obstructions. To see wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that
applies to your country or region. To access the user guides, select Start > Help and Support > User Guides.
Description
A pinhole for use in ejecting the door covering the SIM and SD
card slots.
Connects an optional USB device, such as a keyboard, mouse,
external drive, printer, scanner or USB hub. Standard USB
ports will not charge all USB devices or will charge using a
low current. Some USB devices require power and require you
to use a powered port.
NOTE: USB charging ports can also charge select models of
cell phones and MP3 players, even when the slate is off.
Connects an optional digital display device, such as a high-
performance monitor or projector.
●
White: The slate is connected to external power and
the battery is charged from 90 to 99 percent.
●
Amber: The slate is connected to external power and
the battery is charged from 0 to 90 percent.
●
Blinking amber: A battery that is the only available
power source has reached a low battery level. When
the battery reaches a critical battery level, the battery
light begins blinking rapidly.
●
Off: The battery is fully charged.
Connects an AC adapter.
Right side 15