Using The Windows Recovery Tools - HP Elite x2 1011 G1 Maintenance And Service Manual

Using the Windows recovery tools

To recover information you previously backed up, see Windows Help and Support for steps on restoring files
and folders.
To recover your information using Automatic Repair, follow these steps:
CAUTION: Some Startup Repair options will completely erase and reformat the hard drive. All files you have
created and any software installed on the slate are permanently removed. When reformatting is complete,
the recovery process restores the operating system, as well as the drivers, software, and utilities from the
backup used for recovery.
1. If possible, back up all personal files.
2. If possible, check for the presence of the Recovery Image partition and the Windows partition.
From the Start screen, type file, and then click File Explorer.
– or –
From the Start screen, type pc, and then select This PC.
NOTE:
operating system and programs using the Windows operating system DVD and the Driver Recovery
media (both purchased separately). For additional information, see
media (purchased separately) on page
3. If the Windows partition and the Recovery Image partition are listed, restart the slate by pressing and
holding the
4. Select Troubleshoot, then select Advanced Options, and then select Startup Repair.
5. Follow the on-screen instructions.
NOTE: For additional information on recovering information using the Windows tools, perform a search for
these topics in Windows Help and Support.
If the Windows partition and the Recovery Image partition are not listed, you must recover your
shift key while clicking Restart.
98.
Using Windows operating system
Performing a system recovery 97