Key Mapping - Mitel 6863i Administrator's Manual

KEY MAPPING

PARAMETER IN PARAMETER IN
MITEL WEB UI CONFIGURATION
FILES
Map Redial Key To map redial key to
Map Conf Key To map conf key to
NA map redial as dtmf
NA Map redial as conf
Administrator Level Options
DESCRIPTION
Sets the Redial key as a Speeddial key if a value is
entered for this parameter. If you leave this parameter
blank, the Redial key returns to its original functionality.
For more information on this feature, see
Mapping" on page 5-99.
Sets the Conf key as a Speeddial key if a value is entered
for this parameter. If you leave this parameter blank, the
Conf key returns to its original functionality.
For more information on this feature, see
Mapping" on page 5-99.
The "Redial" key remappings has the same behavior as
the "Speeddial" key when the phone is idle. During an
active call the phone will send the custom number as
DTMF using the phone configured DTMF method
(inbound vs out-of-band RFC2833 vs SIP INFO).
When a user presses the Redial key, the mapped number
will be sent out as DTMF during an active call if the current
"map redial key to" parameter is configured to a number
and the "map redial as dtmf" parameter is set to "1".
For more information on this feature, see
Mapping" on page 5-99.
The "Redial" key remappings has the same behavior as
the "Speeddial" key when the phone is idle. During an
active call the phone will send the custom number as
DTMF using the phone configured DTMF method
(inbound vs out-of-band RFC2833 vs SIP INFO).
When a user presses the Conf key, the mapped number
will be sent out as DTMF during an active call if the current
"map conf key to" parameter is configured to a number
and "map conf as dtmf" parameter is set to "1".
For more information on this feature, see
Mapping" on page 5-99.
"Speeddial Key
"Speeddial Key
"Speeddial Key
"Speeddial Key
3-23