Customizable Directory List Key; Voicemail - Mitel 6863i Administrator's Manual

CUSTOMIZABLE DIRECTORY LIST KEY

The IP phones may have a Directory List key (either a hard key or softkey/programmable key)
depending on the model of the phone. An Administrator can specify a URI override for the
Directory List key by defining the "directory script" parameter in the configuration files.
Specifying a URI for this parameter causes the creation of an XML custom application instead
of the standard function of the Directory List key. An Administrator can configure this parameter
using the configuration files only.
CREATING A CUSTOMIZABLE DIRECTORY LIST KEY
Use the following procedure to create a customized Directory List key on the IP Phone using
the configuration files.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Customizable Directory List Key"

VOICEMAIL

The Voicemail feature on the IP phones allow you to configure lines with phone numbers so
the phone can dial out to connect to a voicemail server. You associate the Voicemail numbers
with the phone numbers configured on each line.
For each assigned Voicemail number, there can be a minimum of 0 or a maximum of 1 Voicemail
access phone number.
The Voicemail list displays a list of phone numbers assigned to the IP phone that has registered
voicemail accounts associated with them.
Note: The Voicemail list does not display the voicemail access number.
The phone displays up to 99 voicemails for an account even if the number of voicemails exceeds
the limit.
Registered account numbers/URIs that exceed the length of the screen, either with or without
the voicemail icon and the message count, are truncated with an ellipse character at the end
of the number/URI string.
The end of the Voicemail list displays the number of new voicemail messages (if any exist).
on .
page A-151
Operational Features
5-245