Mitel 6863i Administrator's Manual page 511

Configuring the Action URI Disconnected Feature
Use the following procedure to configure the Action URI Disconnected feature on the phone.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
on
"Action URI Settings" page A-161
MITEL WEB UI
1. Click on Advanced Settings->Action URI->Event.
2. In the "Disconnected" field, enter a valid URI for which the phone executes a GET on,
when it transitions from the incoming, outgoing, calling, or connected state into the idle
state. Leaving this field empty disables the Action URI Disconnected feature. For example,
.
Operational Features
5-269