Mitel 6863i Administrator's Manual page 406

Mitel 6800i Series SIP Phone Release 4.0.0 SP2 Administrator Guide
CONFIGURING THE BLF/XFER KEY AND THE SPEEDDIAL/XFER KEY US-
ING THE CONFIGURATION FILES
You use the following parameters in the configuration files to configure the BLF/Xfer key and/or
Speeddial/Xfer key on the IP Phone.
SOFTKEY
PARAMETERS
softkeyN type
softkeyN label
softkeyN value
softkeyN line
softkeyN states
Examples:
softkey1 type: speeddialxfer
softkey1 label: BX7801
softkey1 value: 7801
softkey1 line: 1
softkey1 states: idle connected incoming outgoing busy
prgkey1 type: blfxfer
prgkey1 value: 35
prgkey1 line: 1
Refer to the following in Appendix A to configure a BLF/Xfer and Speeddial/Xfer key on the IP
phone using the configuration files.
CONFIGURATION FILES
To set a BLF/Xfer and Speeddial/Xfer key using the configuration files, see Appendix A,
"Softkey/Programmable Key/Keypad Key/Expansion Module Key/Hard Key Parameters"
5-164
PROGRAMMABLE
KEY PARAMETERS
prgkeyN type
prgkeyN value
prgkeyN line
EXPANSION MODULE
PARAMETERS
expmodX keyN type
expmodX keyN label
expmodX keyN value
expmodX keyN line
TOP SOFTKEY
PARAMETERS
topsoftkeyN type
topsoftkeyN label
topsoftkeyN value
topsoftkeyN line
on .
page A-213