Action Uri - Mitel 6863i Administrator's Manual

Mitel 6800i Series SIP Phone Release 4.0.0 SP2 Administrator Guide

ACTION URI

The IP phones have a feature that allows an administrator to specify a uniform resource identifier
(URI) that triggers a GET when certain XML events occur. The Action URI feature prevents the
phones from hanging if the Action URIs should fail. The phones also support transparent,
non-blocking, XML post execute item URIs.
The IP phone XML events that support this feature are defined in the following table.
ACTION URI
Startup
Successful
Registration
Registration
Event
Incoming Call
Outgoing Call
Offhook
Onhook
Connected
Disconnected
XML SIP Notify
Poll
Poll Interval
You can set these parameters using the configuration files or the Mitel Web UI.
REFERENCE
For more information about setting the Action URIs for XML applications, see
page 5-257.
3-62
DESCRIPTION
Specifies the URI for which the phone executes a GET on when a startup event
occurs.
Specifies the URI for which the phone executes a GET on when a successful
registration event occurs.
Specifies the URI for when registration events occur or when there are registration
state changes.
Note: This action URI is not called when the same event is repeated (for example,
a timeout occurs again when registration is already in a timeout state.)
Specifies the URI for which the phone executes a GET on when an incoming call
event occurs.
Specifies the URI for which the phone executes a GET on when an outgoing call
event occurs.
Specifies the URI for which the phone executes a GET on when an offhook event
occurs.
Specifies the URI for which the phone executes a GET on when an onhook event
occurs.
Specifies the URI for which the phone executes an HTTP GET when it goes into
the "connected" state. This includes regular phone calls, intercom calls, paging
calls, RTP streaming, and the playing of a WAV file. It is also triggered when the
phone establishes the second leg of a 3-way call.
Specifies the URI that the phone executes a GET on, when it transitions from the
incoming, outgoing, calling, or connected state into the idle state.
Specifies the URI to be called when an empty XML SIP NOTIFY is received by the
phone.
Specifies the URI to be called every "action uri poll interval" seconds.
Specifies the interval, in seconds, between calls from the phone to the "action uri
poll".
"Action URIs" on