Programmable Keys - Mitel 6863i Administrator's Manual

softkey3 Key 2
softkey4 Key 3
softkey5 (not used)
softkey6 (not used)
Softkeys and programmable keys are configurable using the Mitel Web UI or the configuration
files.

PROGRAMMABLE KEYS

The following table provides the number of softkeys and programmable keys you can configure,
and the number of lines available for each type of phone that has programmable keys.
IP PHONE MODEL EXPANSION MODULE KEYS
6863i N/A
6865i 16 to 48*
(Model M680i)
84 to 252**
(Model (M685i)
*The M680i expansion module consists of 16 softkeys. You can have up to 3 expansion modules
on an IP phone totalling 48 softkeys.
**The M685i expansion module consists of 3 pages of 28 softkeys (for a total of 84). You can
have up to 3 expansion modules on an IP phone totalling 252 softkeys.
SOFTKEY/PROGRAMMABLE KEY/EXPANSION MODULE KEY
FUNCTIONS
You can configure the softkeys and programmable keys on the phones and any attached
expansion module keys to perform specific functions using the configuration files or the Mitel
Web UI.
The following table identifies the available functions of the softkeys, programmable keys, and
expansion module keys on the IP phones. Available functions may vary on each model phone.
Note: Availability of the functions is dependent on your IP phone model. See your
<Model-Specific> IP Phone User Guide for details.
(not used) DND displays for softkey3. Idle displays as
applicable.
Key 3 Line displays for softkey4. Default state
values (idle, connected, incoming, outgoing)
display as applicable.
Key 4 (blank) A blank displays for softkey5. Connected
displays as applicable.
Key 5 Speeddial displays for softkey6. Connected
displays as applicable.
PROGRAMMABLE
KEYS
3
8
Operational Features
LINES
AVAILABLE
2
24
5-131