Conference/Transfer Support For Live Dial Mode - Mitel 6863i Administrator's Manual

Mitel 6800i Series SIP Phone Release 4.0.0 SP2 Administrator Guide
CONFIGURING THE "SIP JOIN" FEATURE USING THE CONFIGURATION
FILES
You use the following parameters to configure the "SIP Join feature in the configuration files:
sip join support
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
Join Feature for 3-Way Conference"

CONFERENCE/TRANSFER SUPPORT FOR LIVE DIAL MODE

By default, when users are initiating a conference call or transfer, they will not hear a dial tone
before dialing begins (pre-dial mode). The phone does not automatically dial out the number
until the user presses the "Conf" or "Transfer" key. This allows the users to make changes to
the dialing number before initiating the call. Administrators can now enable live dial mode by
configuring the new "confxfer live dial" parameter. In live dial mode, when the user is
completing a conference call or transfer, they will hear a dial tone before dialing begins. In
addition, the phone will either match the number to the dial plan or wait for the set digit timeout.
In the default pre-dial mode, users are able to edit the destination number prior to dialing,
whereas in live dial mode they are not able to, however the "Dial" and "Cancel" softkeys are
provided while the user inputs the number.
Reference
For more information about conference/transfer support for live dial mode, see your <
Model-Specific> SIP IP Phone User Guide.
CONFIGURING CONFERENCE/TRANSFER IN LIVE DIAL MODE
You use the following parameters to configure conference/transfer feature in live dial mode:
• confxfer live dial
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Conference/Transfer in Live Dial Mode"
5-286
on .
page A-91
on .
page A-91
"SIP