Usb Headset Support - Mitel 6863i Administrator's Manual

USB HEADSET SUPPORT

Note: Applicable to the 6867i and 6869i IP Phones only.
First implemented in Release 4.0.0 SP1, USB headsets are supported for the Mitel 6867i and
6869i SIP phones. Users can simply plug in the supported USB headset into the USB input
port located on the back of their phones and configure the phone's audio mode accordingly
(e.g. Headset, Speaker/Headset, or Headset/Speaker) to start using their USB headset.
The following USB headsets are currently supported by the 6867i and 6869i SIP phones:
• Jabra BIZ 2400 Duo USB, UC (P/N: 2499-829-105)
• Plantronics Blackwire C720 (P/N: 87506-12)
• Plantronics Voyager Legend UC, B235, NA (P/N: 87670-01)
• Sennheiser D 10 USB - US (Prod. Code: 506421)
Notes:
1. If both an analog (non-DHSG) headset and a USB headset are connected to the
phone, the USB headset will take precedence over the analog headset (i.e. the USB
headset will be functional while the analog headset will not be functional).
2. If both a DHSG headset and a USB headset are connected to the phone and DHSG
is enabled, the DHSG headset will take precedence over the USB headset.
6867i/6869i USB Input Port Location
Operational Features
5-39