Xml Softkey Uri - Mitel 6863i Administrator's Manual

3. Click Save Settings to save your changes.
Configuring XML SIP NOTIFY using the Mitel Web UI if an Empty SIP NOTIFY Message
Received by the Phone
Use the following procedure in the Mitel Web UI to configure the XML SIP NOTIFY parameter
when the phone receives an empty SIP NOTIFY message.
MITEL WEB UI
1. If the content is missing in the SIP NOTIFY message received by the phone, the phone
automatically uses the value you specify for the Action URI XML SIP Notify parameter at
the path Advanced Settings->Action URI.
Click on Advanced Settings->Action URI.
2. Specify a URI to be called when an empty XML SIP NOTIFY is received by the phone.
For example:
http://myserver.com/myappli.xml
Note:
The sip xml notify event parameter at the path Advanced Settings->Global
SIP->Advanced SIP Settings must be enabled.
3. Click Save Settings to save your changes.

XML SOFTKEY URI

In addition to specifying variables for the Action URIs, you can also specify variables in the
XML softkey URIs that are bound when the key is pressed. These variables are the same as
those used in the Action URIs.
When an administrator enters an XML softkey URI either via the Mitel Web UI or the
configuration files, they can specify the following variables:
Operational Features
5-273