Backlight Mode - Mitel 6863i Administrator's Manual

Mitel 6800i Series SIP Phone Release 4.0.0 SP2 Administrator Guide
Setting Time Server Using the Mitel Web UI
Use the following procedure to set the Time Server and optionally set the IP Address of Time
Servers 1, 2, and/or 3.
MITEL WEB UI
1.
1. Click on Basic Settings->Preferences->Time and Date Setting.
To enable/disable Time Server:
2. The "NTP Time Server" field is enabled by default. If you need to disable the Time Server,
uncheck the box. The Time Server 1, 2, and 3 fields are grayed out when disabled.
To set Time Server 1, 2, and/or 3:
Note: The "Time Server" field must be enabled to enter values in the "Time Server 1,
2, and 3" fields.
3. In the "Time Server 1", "Time Server 2", and/or "Time Server 3" field(s), enter the IP
address of the Time Server 1, 2, and/or 3 in your network, in dotted decimal format.
For example, 132.234.5.4
4. Click Save Settings to save your changes.

BACKLIGHT MODE

Note: Applicable to the 6865i IP Phone only.
The 6865i has a backlight feature that allows you to turn the backlight on the LCD:
• Off - Backlight is always OFF.
• Auto (Default)- Automatically turns ON the backlight when the phone is in use, and then
automatically turns OFF the backlight when the phone is idle after a specified length of time.
"The Auto" setting sets the phone to turn off the backlighting after a period of inactivity. The
period of time that the phone waits before turning the backlight off is also configurable.
You can set this backlight feature using the configuration files and the IP Phone UI.
5-28