Locking/Unlocking The Save And Delete Keys - Mitel 6863i Administrator's Manual

6800i series
Hide thumbs Also See for 6863i:
Table of Contents

Advertisement

Mitel 6800i Series SIP Phone Release 4.0.0 SP2 Administrator Guide
Note: The 6863i and 6865i IP phones prevent users from setting a Speeddial key via
the Phone UI on a key that has been locked.
LOCKING THE IP PHONE KEYS USING THE CONFIGURATION FILES
Use the following procedures to lock the softkeys and programmable keys on the IP phone.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the
section,
"Locking Keys"

LOCKING/UNLOCKING THE SAVE AND DELETE KEYS

Note: Applicable to the 6865i IP Phone only.
By default, the 6865i has two keys dedicated to the Save and Delete functions. These two keys
can be made programmable by the Administrator, freeing up the total number of programmable
keys if required.
If a System Administrator unlocks the Save and Delete keys, these keys can be configured
with the same functions that are available for the other programmable keys. Only the System
Administrator can unlock these keys.
The Save key allows you to save entries to the Local Directory and perform a Save-To from
the Callers List. It also allows you to save speeddial information to a programmable key. You
can also use the Save key while using specific XML applications.
The Delete key allows you to remove entries from the Local Directory List and Callers List.
(Must enter the Directory or Callers list and select an entry, then press twice to delete entry).
By default, the Save and Delete keys are locked so that a user can use them for saving and
deleting only. An Administrator can unlock these keys using the configuration files, allowing the
keys to be programmed with other functions if required. An Administrator can use the following
parameters in the configuration file to lock and unlock the Save and Delete keys for the 6865i:
prgkey5 locked
prgkey6 locked
The value of "0" unlocks the keys, and the value of "1" locks the keys. The default is "1" (lock).
The following is an example of unlocking the Save and Delete keys on the 6865i using the
configuration files:
Example:
prgkey5 locked: 0
prgkey6 locked: 0
5-58
on
.
page A-247

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

6865i6867i6869i

Table of Contents