Mitel 6863i Administrator's Manual page 440

Mitel 6800i Series SIP Phone Release 4.0.0 SP2 Administrator Guide
**When you configure a softkey as "Pickup", you can configure the state of the softkey as "idle,
outgoing", or just "idle", or just "outgoing".
Examples for 6863i and 6865i
SERVER PARK CONFIGURATION
Asterisk prgkeyN type: park
sip lineN park pickup config:
70;70;asterisk
Sylantro prgkeyN type: park
sip lineN park pickup config:
*98;*99;sylantro
BroadWorks prgkeyN type: park
sip lineN park pickup config:
*68;*88;broadworks
ININ PBX prgkeyN type: park
sip lineN park pickup config:
callpark;pickup;inin
Note: The 6863i and 6865i do not allow for the configuration of labels and states for
programmable keys.
Call Park/Pickup Configuration Precedence Rule
For users upgrading from Release 2.x firmware, the "softkeyN value" parameter will be used
if the "sip lineN park pickup config" parameter is not set. If the per-line park pickup config
parameter is set, the following precedence rule will apply:
1. "sip lineN park pickup config: <park_value>;<pickup_value>;<asterisk | sylantro |
broadworks>" will override
"sip park pickup config: <park_value>; <pickup_value>; <asterisk | sylantro | broadworks
| inin>"
2. "sip park pickup config: <park_value>;<pickup_value>;<asterisk | sylantro | broadworks |
inin>"
will override
"softkeyN value: <park_or_pickup_value>" (or topsoftkeyN, prgkeyN, or expmod1 keyN).
3. "softkeyN value: <asterisk|sylantro|broadworks|inin>;<park_or_pickup_value>"
will have lowest priority.
For example, the following has been configured on the phone:
softkey1 type: park
softkey1 label: parkCall
softkey1 states: connected
softkey1 value: broadworks;*68
softkey2 type: pickup
softkey2 label: pickupCall
softkey2 states: idle, outgoing
5-198
PICKUP CONFIGURATION
prgkeyN type: pickup
sip lineN park pickup config: 70;70;asterisk
prgkeyN type: pickup
sip lineN park pickup config:
*98;*99;sylantro
prgkeyN type: pickup
sip lineN park pickup config:
*68;*88;broadworks
prgkeyN type: pickup
sip lineN park pickup config:
callpark;pickup;inin